On3 Special - Caboose 901

901 - On3 Model

Last Folio for brass engraving

Left the final file at Corel Draw. Left Front, right Back, and the two on the right side are the folio before bring them on the brass sheet. On the final two images right, all black parts are gone after put them into the etch. The white parts will remain. But to draw its easier to have the remain parts in Corel Draw black.

901 - On3 Model

new step - slide for brass engraving

here is the brand new folio for the second brass sheet.

CAD Parts

CAD View

The caboose 901 ready for the wax plotter and later as basic for the brass casting. Boerries Burkhardt.

Brass Parts

Reality View

Here we see the same parts after made in brass. The quality is perfect and 4 side windows, two coupola windows and the holders for the plag or lamp are ready to use.

Brass Parts

Coupola window from the back

The back of the window is special made to keep a plastic or real glass in the window.You can paint this part, glue the glass and than glue the black painted part to the frame or sold it directly on the side.

Caboose 901 Floor

901 - Floor

CAd view of the caboose floor.

Caboose 901 Coupola

901 - Front / Back of Coupola

The windows are already wider to take the brass windows for a perfect museum quality model.

901 - On3 Model

901 - Coupola with windows and roof

Complete part to plug on floor.

901 - On3 Model

Brass casting windows

Here I added the first brass castings to the front and back of the caboose

901 - On3 Model

Add front and end

The front and end were added.

Caboose 901 Basic

901 - Basic Frame

The four sides were added to the floor.

901 - On3 Model

The body of the caboose made out of brass

Just bend the brass engraving sheet.

901 - On3 Model

Now the side were added

901 - On3 Model

Corner of caboose 901

The model is now without the brass casting parts.

901 - On3 Model

Brass castings added

Here the brass windows shown on the coupola.

901 - On3 Model

Castings were added to side and windows

901 - On3 Model

window casting

now in place

901 - On3 Model

Roof support made out of brass rod

901 - On3 Model

Roof now on the side.

901 - On3 Model

New coupola on body

901 - On3 Model

New coupola on body

901 - On3 Model

New coupola on body

901 - On3 Model

Storage room added

The seperator will be added as well as the platform will be screwed to floor.

901 - On3 Model

WP&YR 901

standing on narro wgauge truck on real White Pass & Yukon gravel. Thanks to Yukon Mike!

901 - On3 Model

901 End View

The door will be added

901 - On3 Model

901 Platform

Here we see all parts of the platform. They will fit all together

901 - On3 Model

901 Jig

A special jig for the platform was designed.

901 - On3 Model

901 brass sheet

901 - On3 Model

901 bass sheet

901 - On3 Model

901 - End Plattform

not connected to the plattform, the steps are ready

901 - On3 Model

901 Platform

CAD View with Kadee Coupler box.

901 - On3 Model

901 - Plattform in brass

Steps

901 - On3 Model

901 with new plattform

901 - On3 Model

901 step are added

901 - On3 Model

901 not an easy soldering job

901 - On3 Model

901 - New underframe

brass underframe was added.

Copyright 1994-2014 Whitepassfan.net by Boerries Burkhardt